Envoyé: lundi 31 mars 2008 15:26
À: LISAN Benjamin (ext.); DE LA MOTTE Hugues (ext.)
Objet: Case 240-743-775 (issues with the compatibility with powerpath ...)
Good afternoon Benjamin,
please find below the procedure to clean your configuration and get the device properly available.
Run the following:
vxddladm excludearray all
mv /etc/vx/ /etc/vx/
mv /etc/vx/ /etc/vx/
vxconfigd -k     (this can take some time to complete)
vxddladm includearray all
then running
vxdisk -o alldgs list
you should see the device how expected.
After that please send me the output of following commands:
cat /etc/vx/
cat /etc/vx/
vxdisk -e -o alldgs list
During the execution, the I/O will not be suspended, so the device already configured, will keep on working.
Please let me know when you will have run the suggested procedure or if you need further assistance or information.
Best Regards
Davide Magistris

***NOTICE: Symantec limits all e-mail, including attachments, to 10MB. Your message will not be delivered if it exceeds this limit. Please create a shorter message, remove attachments, or consult your technician if your message exceeds the 10MB limit.***


***NOTICE: This e-mail message is for the sole use of the intended recipient(s) and may contain certain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by e-mail and destroy all copies of the original message. Symantec and the Symantec logo are U.S. registered trademarks of Symantec Corporation. VERITAS is a trademark of Symantec Corporation. Other brands and products are trademarks of their respective holders. Copyright © 2007 Symantec Corporation. All rights reserved.***