Bill of Materials

RF_MODEM
revision 1.2

2002-06-04, KHT



Part Name/Number       Description                      Qty.   Comps.
----------------       -----------                      ----   ------

BAT254                 Diode, Si                        3      D1
                                                               D5-6
CON6_FEMALE            Connector, 0.9 mm pin, female    4      P3-5
                                                               P7
C_100N_0603_X7R_K_50   Capacitor 0603                   12     C1
                                                               C4-14
C_15P_0603_NP0_G_50    Capacitor 0603                   2      C15-16
C_3U3_TAN_B            Capacitor, tantal                2      C2-3
DC_JACK_2.5            DC jack, 2.5mm center pin        1      P9
DSUB_9F                D-Sub, 9 pin, female             1      P1
HOLE_4.2               Hole, NPTH                       4      H1-4
LED_CL150GCD           LED, green, SMD                  1      D2
LED_CL150URCD          LED, red, SMD                    1      D3
LED_CL150YCD           LED, yellow, SMD                 1      D4
LM61                   Temperature sensor, SOT23        1      U5
LP2981-3.0             3.0V low drop-out regulator      1      U1
MAX3232                RS-232 Transceiver, SO-16        2      U2-3
MODULAR_CONN_6         6-pin modular jack               1      P8
PIC16LF876             Microcontroller, SO-28           1      U4
ALPS-SKHUAF            Push button, SMD                 3      S1-3
R_0_0603               Resistor 0603                    2      R5
                                                               R8
R_470_0603_J           Resistor 0603                    3      R2-4
R_47K_0603_G           Resistor 0603                    1      R1
SCREW_TERM_2           2 pin terminal, screw            1      P2
SMA_GND                SMA connector (GND)              1      P6
TESTPIN                Testpoint                        8      TP1-8
X_10.000/50/30/10/16   Crystal, HC-49-SMD               1      X1
--------------------------------------------------------------------------------
                                 End of report
--------------------------------------------------------------------------------